everroll® compact

everroll® compact arena flooring

Product Details

everroll® compact is a universal product suitable for numerous applications. Its anti-slip properties help to reduce the risk of slipping, even in wet areas. The toughened elastic consistency of everroll® compact offers protection from blunt impact and constant loads. The product is also resistant to sharp or pointed objects. Even when penetrated, the surface will close up almost completely upon removal of the object.

MaterialPUR-bonded rubber granulate on a rubber and EPDM base.
Thickness6 mm
Roll dimensionsWidth: 1,250 mm
Length: 10 m / 15 m / 20 m
Anti-slip resistanceAnti-slip resistance R9 / R10 in accordance with BGR 181 and subject to décor. Rated to level C in accordance with DIN 51097. Level C is considered as the highest class of anti-slip rating. Coefficient of kinetic friction > 0,3 μ in accordance with EN 13893.
InstallationInformation regarding the installation and cleaning of the product can be sourced via download
Impact Resistance6 mm: 15 Nm
Gloss level0.0 - 0.3 GU (Gloss Unit) as "edition 4.0" variant
Reduction of impact sound6 mm: approx. 19 dB
Fire behaviouruni I / stone / xtreme: Cfl-s1 according to DIN EN 13501-1
endurance / vision / classic / basic: Efl according to DIN EN 13501-1

Applications

everroll® compact arena flooring BSW Berleburger Schaumstoffwerk GmbH

Mountain Railway

everroll® compact arena flooring BSW Berleburger Schaumstoffwerk GmbH

Ski Rental


Special properties

  • High skid resistance, even when wet
  • Above average impact resistance
  • Can act as a protective layer for screeds and other floor constructions
  • Acts as impact sound insulation
  • Minimal colour deterioration
  • Non-reflective
  • Suitable for under-floor heating

Designs

Click on a sample image to view all colour variants for each design group.

everroll® mycreation – tailor-made alpine and arena floorings

For orders of a certain size and above, BSW can manufacture alpine floorings in customised colour combinations and samples. BSW also manufactures floor inlays to client specification, e.g. company logos, floor markers, training markings, etc.


The colours in the illustrations may differ from the original for technical reasons. Your buying decision should therefore be considered only after viewing an original sample. Request your sample from BSW today by contacting our experts. Minor colour deviations between different production batches cannot always be avoided. Normally, all floorings of identical colour and pattern will be delivered from the same production run.

Annex XVII Entry 50 REACH contains requirements for articles accessible for the general public. We therefore ask our customers to check whether the intended use of products bought from us complied with this legislation.