everroll® impact+ rubber fitness flooring
Product details
everroll® impact+ is a two-layer fitness flooring system build-up developed by REGUPOL BSW for special and project specific requirements. everoll® impact+ provides very good properties in terms of impact resistance and can be fine-tuned individually on dynamic characteristics. In addition, it supports movement sequences and is easy on joints, especially under heavy loads. Footfall noise reduction is clearly noticeable and reflects an important side effect. The special surface provides slip resistance, as well as pleasant and special haptics. Its wide variety of colours offers many different design options.
| Material composition | Point-elastic, two-layer sports flooring made from PUR bonded granules |
|---|---|
| Thickness | 8+6, 8+8, 10+6, 10+8 mm (Regupol® elastic layer + everroll® top layer) |
| Standard Thickness | Regupol® elastic layer: 8 mm or 10 mm everroll® top layer: 6 mm or 8 mm |
| Dimensions of rolls | Standard width elastic layer: 1,500 mm Standard width top layer: 1,250 mm Standard lengths: 10 m / 15 m / 20 m |
| Force reduction | everroll® impact+ offers excellent force reduction ratings: 8 + 6 mm: approximately 29.3 % 10 + 8 mm: approximately 33.3 % The force reduction rating is expressed as a relative percentage(bare concrete slab = 0 % force reduction) of the force that is not reflected when applied to a resilient surface. The higher the force reduction rating, the more “forgiving” the surface. |
| Impact resistance | 8 + 6 mm: 17 Nm 10 + 8 mm: 18 Nm |
| Gloss level | 0.0 - 0.3 GU (Gloss Unit) in "edition 4.0" |
| Impact sound improvement rating (dLw) | > 21 dB |
Special properties and benefits:
- gentle on joints during general fitness training, excellent force reduction rating
- protects subfloors
- highly impact sound and shock absorbent
- impact resistance exceeds industry standard
- slip resistant
- suitable for underfloor heating
- good colour fastness
- no troublesome light reflections
Designs and areas of application for everroll® impact+ fitness flooring
Click on a sample image to view all colour variants for each design group.
everroll® mycreation – tailor-made fitness floorings
For orders above regular quantities, BSW can manufacture fitness floorings in customised colour combinations and samples. BSW also manufactures floor inlays to client specification, e.g. company logos, floor markers, training markings, etc.
*Where direct, long-lasting or repeated skin contact with the flooring is expected, it must comply with the requirements on a consumer product in accordance with EU regulations. Where this is not expected, a selection can be made from the complete portfolio of decors. Products that meet the requirements on a consumer product are explicitly marked as such. If you have any doubts or questions, please contact your sales representative or write to us via our contact form.
The colours in the illustrations may differ from the original for technical reasons. Your buying decision should therefore be considered only after viewing an original sample. Request your sample from BSW today by contacting our experts. Minor colour deviations between different production batches cannot always be avoided. Normally, all floorings of identical colour and pattern will be delivered from the same production run.
Annex XVII Entry 50 REACH contains requirements for articles accessible for the general public. We therefore ask our customers to check whether the intended use of products bought from us complied with this legislation.