Regupol® Protective Layers for Flat Roofs • English • berleburger.com

The Regupol® resist FH building protection sheet is the new product from BSW to protect membranes and insulations, and to reduce the fire load on flat roofs. The flame-retardant equipment makes the sheets made of PUR-bound rubber granulates resistant against flying sparks and radiant heat.

Areas of application

On the membranes of flat roofs underneath gravel filling, tile material, etc., underneath solar modules and as hard roofing.

Regupol® resist is the most versatile product to protect membranes and insulations. It is made of PUR-bonded rubber fibres and granules. Regupol® resist is classified as a protective layer in accordance with DIN 18195, part 10. In comparison to protective screed and concrete, Regupol® resist possesses clear technical, physical and financial advantages. It is easy to install and can be optimally bonded to any kind of sub-bases by means of hot bitumen, special adhesives and plastic adhesives.

Areas of application

Flat roofs, patios and balconies, car park decks, inverted roofs, building construction, public works and civil engineering, pipeline construction, pre fabricated buildings, construction of flues and airducts, protection of membranes, insulating materials.

Regupol® resist 9510 is an alternative to Regupol® resist for protective roof membranes and insulation, as well as for higher loads. Regupol® resist 9510 consists of PUR-bonded butyl rubber and is classified as a protective layer in accordance with DIn 18195, part 10.

Areas of application

On roof membranes on high-load building membranes, flat roofs, under terrace floors, etc.

Regupol® drain plus provides both a protection and drainage layer. The top side of Regupol® drain plus is laminated with a fibre fabric which allows only liquids to seep through. The profiled underside makes sure that liquids can drain off. Regupol® drain plus possesses high mechanical load capacity, does not corrode and is spade-resistant.

Areas of application

Beneath roof plantings an terrace slabs

The underside of Regupol® hot plus is coated with a hot melt adhesive so that overlapping and vertical joints can be welded by hot air treatment.

Areas of application

Regupol® hot plus can be optimally bonded to membranes such as Wolfin, EPDM, PVC, bituminous waterproof membranes (adhesiveness to be tested in advance).

Regupol® stabi plus has a laminated fibre fabric coating which provides the necessary dimensional stability. Overlapping and shaping can be avoided. Regupol® stabi plus offers approx. 75% less expansion/ shrinking under variations in temperature in comparison to conventional standard products.

Areas of application

Regupol® stabi plus is used for intermediate protection purposes. It can also be used as a separating layer on membranes. The excellent tensile strength allows also vertical installation, for example in civil engineering.

Regupol® Roofing and Pavement Tiles serve as inspection paths on flat roofs and as protective basic elements for solar collectors, antennas ans building engineering equipment. The flame-retardant properties make Regupol® Roofing and Pavement Tiles resistant to flying sparks and radiant heat. They meet the requirements of hard roofing.

Areas of application

Maintenance paths on flat roofs with and without load, base panels for solar systems, antennas, building engineering equipment, etc.