playfix® EPDM IS

Installation Instruction

Preparing the Sub-Base

playfix® EPDM IS can only be laid on bound surfaces. Particular attention must be paid to evening out irregularities.

Edge Restraint

An edge restraint is not absolutely necessary. Contact your playfix® customer consultant for more information.

Installation

The elastic wear layer of playfix® EPDM IS is applied in a semi-fluid state in situ onto the prepared area. This work can only be carried out by BSW themselves or by an authorised agent.

There should be dry and sunny conditions with a minimum outside temperature of 15° Celsius during the installation of a seamless in-situ safety surface. The surface cannot be laid when raining or when rain is imminent, as the bonding agent reacts too quickly and the safety surface will suffer permanent damage.