playfix® structure M can also be applied to even, arched, or slanted surfaces and adapts to those contours in the bearing layer of the sub-base perfectly. The fall protection covering, manufactured using the pavedin- place (in-situ) installation method, complies with the DIN EN 1177:2008 for fall protection coverings, up to a maximum critical fall height of 3.00 m.
|Material||Wear layer consisting of solid-coloured EPDM granules mulch mixed with a PU bonding agent; base layer consisting of SBR granules mixed with a PU bonding agent|
|Composition||Dual-layer construction consisting of wear layer and elastic safety layer.|
|Colours||Green, Brown-Beige, Red-Brown-Slate Grey, other colours on request; more information: BSW Flooring Designer|
|Application Areas||For playgrounds, outdoor swimming pool surroundings, school yards, and similar outdoor areas. Wherever there is an increased risk of injury due to falls, but also for pure design measures.|
|Wear layer||Thickness 20 mm|
|Elastic Base Layer||Thickness 40-90 mm|
|Installation||On unbound or bound sub-bases according to DIN V 18035-6. The unbound sub-base must be compacted to ensure that it is stable and crush-resistant. Installation only by skilled BSW technicians. See Installation Instructions|