Regupol® Roofing and Pavement Tiles

Membrane protection under solar modules and as inspection paths on flat roofs

Regupol® Roofing and Pavement Tiles serve as inspection paths on flat roofs and as protective basic elements for solar collectors, antennas and building engineering equipment.

Their flame-retardant properties make Regupol® Roofing and Pavement Tiles resistant to flying sparks and radiant heat. They meet the requirements of hard roofing.

Their dense, viscoplastic material properties protect the membrane. Compared to concrete slabs, their low weight greatly facilitates installation and is a static advantage. Moreover, the soft edges of the slabs minimise the risk of damaging the membrane. Thanks to a simple dowel system, installing the slabs is easy and they can be used instantly. Regupol® Roofing and Pavement Tiles are suitable for flat roofs both with and without load.

The available colours red and black mark the maintenance paths even with low visibility. On their undersides are crosswise drainage grooves, which makes it possible to position them in any direction towards the incline. Regupol® Roofing and Pavement Tiles can be laid directly on bitumen sheets. With some plastic membranes (PVC soft) an additional aluminium foil is required.

Regupol® Roofing and Pavement Tiles with general appraisal certificate no. P-20151807

The general appraisal certificate confirms that Regupol® Roofing and Pavement Tiles are resistant to flying sparks and radiant heat according to DIN V ENV 1187.

The test was performed on both standard old roof varieties, FPO and bitumen membranes. One version of Regupol® Roofing and Pavement Tiles is produced with an aluminium lamination on its underside to avoid the migration of plasticisers. Click here to find out more.