everroll® compact fitness and gym flooring is available in 4 mm and 6 mm thickness. The resilient rubber flooring ensures that training is easy on the joints – its’ outstanding durability offers protection against impacts and against heavy loads.
|Material composition||Resilient, homogeneous gym flooring made from PUR bonded rubber granules|
|Thickness||4, 6 mm (depending on design)|
|Dimensions of rolls||Standard width: 1,250 mm|
Standard lengths: 10 m / 15 m / 20 m
|Dimensions of puzzletile||Outer size: 600 x 600 mm|
Thickness: 6 mm
|Force reduction||everroll® compact offers a higher force reduction rating than most conventional floor coverings:|
4 mm: approximately 7.3 %
6 mm: approximately 10.0 %
The force reduction rating is expressed as a relative percentage (bare concrete slab = 0 % force reduction) of the force that is not reflected when applied to a resilient surface. The higher the force reduction rating, the more “forgiving” the surface.
|Impact resistance||4 mm: 14 Nm|
6 mm: 15 Nm
|Gloss level||0.0 - 0.3 GU (Gloss Unit) in "edition 4.0"|
|Impact sound improvement rating (dLw)||4 mm: approximately 18 dB|
6 mm: approximately 19 dB
Special properties and benefits:
- easy on the joints during general fitness training, medium force reduction rating
- protects subfloors
- impact sound and shock absorbent
- impact resistance exceeds industry standard
- slip resistant
- suitable for underfloor heating
- good colour fastness
- no troublesome light reflections
Designs and areas of apllication for everroll® compact gym flooring
Click on a sample image to view all colour variants for each design group.
everroll® mycreation – tailor-made fitness and gym floorings
For orders above average quantities, BSW can manufacture fitness floorings in customised colour combinations and samples. BSW also manufactures floor inlays to client specification, e.g. company logos, floor markers, training markings, etc.
*Where direct, long-lasting or repeated skin contact with the flooring is expected, it must comply with the requirements on a consumer product in accordance with EU regulations. Where this is not expected, a selection can be made from the complete portfolio of decors. Products that meet the requirements on a consumer product are explicitly marked as such. If you have any doubts or questions, please contact your sales representative or write to us via our contact form.
The colours in the illustrations may differ from the original for technical reasons. Your buying decision should therefore be considered only after viewing an original sample. Request your sample from BSW today by contacting our experts. Minor colour deviations between different production batches cannot always be avoided. Normally, all floorings of identical colour and pattern will be delivered from the same production run.
Annex XVII Entry 50 REACH contains requirements for articles accessible for the general public. We therefore ask our customers to check whether the intended use of products bought from us complied with this legislation.