BSW's everroll® impact rubber fitness and gym flooring is available in 8 mm, 10 mm and 12 mm thickness. The robust rubber flooring was developed for free-weight training and cross fit-facilities. everroll® impact gym flooring can withstand heavy impacts, provides protection against injuries and is specifically resistant against drop impacts from free-weights, dumbbells or kettlebells.
|Material composition||Resilient, homogeneous gym flooring made from PUR bonded rubber crumb and EPDM granulate|
|Thickness||8, 10, 12 mm (depending on design)|
|Dimensions of rolls||Standard width: 1,250 mm|
Standard lengths: 10 m / 15 m / 20 m
|Force reduction||everroll® impact offers a higher force reduction rating than most conventional floor coverings:|
8 mm: approximately 12.9 %
10 mm: approximately 13.7 %
12 mm: approximately 16.0 %
The force reduction rating is expressed as a relative percentage (bare concrete slab = 0 % force reduction) of the force that is not reflected when applied to a resilient surface. The higher the force reduction rating, the more “forgiving” the surface.
|Impact resistance||8 mm: 15 Nm|
10 mm: 15 Nm
12 mm: 15 Nm
These impact resistance ratings exceed the universally applicable minimum requirement for sports floorings of 8 Nm quite considerably.
|Gloss level||0.0 - 0.3 GU (Gloss Unit) in "edition 4.0"|
|Impact sound improvement rating (dLw)||8 mm: approximately 21 dB|
Cardio and Strength
Special properties and benefits:
- Improved joint protection during fitness exercises, moderate shock absorption
- Heightened protection for screeds and other floor constructions according to the specific use
- High level of impact sound insulation
- impact resistance exceeds industry standard
- slip resistant
- suitable for underfloor heating
- good colour fastness
- no troublesome light reflections
Designs for everroll® impact gym flooring
Click on a sample image to view all colour variants for each design group.
6 colour Versions | Design: multicolour, small granulate7 colour Versions | Design: multicolour, large granulate
everroll® mycreation – tailor-made gym floorings
For orders above average quantities, BSW can manufacture fitness floorings in customised colour combinations and samples. BSW also manufactures floor inlays to client specification, e.g. company logos, floor markers, training markings, etc.
The colours in the illustrations may differ from the original for technical reasons. Your buying decision should therefore be considered only after viewing an original sample. Request your sample from BSW today by contacting our experts. Minor colour deviations between different production batches cannot always be avoided. Normally, all floorings of identical colour and pattern will be delivered from the same production run.
Annex XVII Entry 50 REACH contains requirements for articles accessible for the general public. We therefore ask our customers to check whether the intended use of products bought from us complied with this legislation.