everroll® weightlayer is an extra robust tile product, specifically designed for heavy-duty weight-training and weight-lifting. The tile thickness of 43 mm results in a maximum level of impact and shock absorption, as well as a certain degree of vibration reduction.
|Material composition||PUR bonded and moulded rubber tile with a 4 mm everroll® compact top layer|
|Thickness||43 mm (39 mm black base layer + 4 mm everroll® compact top layer)|
|Dimensions of tile||1,000 x 500 mm|
including “appearance joint” for square design
|Force reduction||everroll® weightlayer offers an excellent force reduction rating:|
approximately 44.2 %
The force reduction rating is expressed as a relative percentage (bare concrete slab = 0 % force reduction) of the force that is not reflected when applied to a resilient surface. The higher the force reduction rating, the more “forgiving” the surface.
|Impact resistance||> 21 Nm|
This impact resistance rating exceeds the universally applicable minimum requirement for sports floorings of 8 Nm quite considerably.
|Gloss level||0.0 - 0.3 GU (Gloss Unit) in "edition 4.0"|
|Impact sound improvement rating (dLw)||> 21 dB|
Special properties and benefits:
- easy on the joints during general fitness training, extraordinary force reduction rating
- thoroughly protects subfloors
- extremely impact sound and shock absorbent
- impact resistance exceeds industry standard
- slip resistant
- suitable for underfloor heating
- good colour fastness
- easy installation
- no troublesome light reflections
Designs for everroll® weightlayer floor sheets
Other designs available on request.
everroll® mycreation – tailor-made fitness floorings
For orders above average quantities, BSW can manufacture fitness floorings in customised colour combinations and samples. BSW also manufactures floor inlays to client specification, e.g. company logos, floor markers, training markings, etc.
The colours in the illustrations may differ from the original for technical reasons. Your buying decision should therefore be considered only after viewing an original sample. Request your sample from BSW today by contacting our experts. Minor colour deviations between different production batches cannot always be avoided. Normally, all floorings of identical colour and pattern will be delivered from the same production run.
Annex XVII Entry 50 REACH contains requirements for articles accessible for the general public. We therefore ask our customers to check whether the intended use of products bought from us complied with this legislation.