Regupol® vibration 550

Product Details

Standard forms of delivery, ex warehouse

RollsThickness: 15 mm
Length: 10,000 mm, special lengths available
Width: 1,250 mm
Stripping/PlatesOn request
Die-cutting, water-jet cutting, self-adhesive versions possible
Regupol® vibration 550 Vibration Technology

Physical Data

Continuous static load0.30 N/mm²
Peak loads (rare, short-term loads)0.40 N/mm²
Static modulus of elasticityBased on
EN 826		0.5 - 1.7N/mm²Tangential modulus, see figure “Modulus of elasticity”*
Dynamic modulus of elasticityBased on
DIN 53513		2.5 - 7.0N/mm²Depending on frequency, load and thickness, see figure “dynamic stiffness“*
Mechanical loss factorDIN 535130.16[-]Load-, amplitude- and frequency-dependent
Compression setBased on
DIN EN ISO 1856		3.4%Measured 30 minutes after decompression with 50% deformation / 23 °C after 72 hrs
Tensile strengthBased on
DIN EN ISO 1798		0.60N/mm²
Elongation at breakBased on
DIN EN ISO 1798		65%
Tear resistanceBased on
DIN ISO 34-1		5.0N/mm
Fire behaviourDIN 4102
DIN EN 13501		B2
E		[-]
[-]		Normal flammability
Sliding frictionBSW-laboratory
BSW-laboratory		0.7
0.8		[-]
[-]		Steel (dry)
Concrete (dry)
Compression hardnessBased on
DIN EN ISO 3386-2		415kPaCompressive stress at 25 % deformation
test specimen h = 60 mm
Rebound elasticityBased on
DIN EN ISO 8307		36%dependent on thickness,
test specimen h = 60 mm
Force reductionDIN EN 1490465%dependent on thickness,
test specimen h = 60 mm
Ozone resistanceDIN EN ISO 17025Cracking stage 0[-]